Gear Wash Blog

A Beginner's Guide to Implementing a Decon Procedure

*Adjust accordingly to best suit unique incident or department’s protocol

PRIOR TO A FIRE CALL

1. Invest in individually customized PPE that is properly fitted to each firefighter.

When budget allows, consider particulate barrier hoods; light, breathable turnouts; and a set of alternative PPE for non-structural calls (this may also reduce heat stress and cardiac fatigue).

2. Stock the apparatus with decon supplies, including:

  • 5 gallon bucket
  • A hose with small nozzle
  • Scrub brushes
  • NFPA-approved detergent
  • Spray bottles
  • Facial wipes
  • Decon bags (large enough to fit turnout ensemble)
  • Spare gear bags and garments 


3. Activate your local decontamination mobile unit, if available in your region

4. Pre-establish a storage area on the truck or in a separate unit to store soiled PPE

 

AT THE FIRE SCENE

5. Set up a designated & enclosed decon space in the direct path of the exit point and away from the engine.

6. Get hosed down head to toe using a small-nozzled hose before removing PPE or SCBA

7. Use a scrub brush to knock loose any remaining residue and repeat #6, if needed.

8. Label and use an at least 3 mil thick, airtight Decon Bag to isolate all soiled PPE.

9. Carefully remove SCBA and hood with gloved hands and pack into Decon Bag

10. Doff remaining ensemble, also storing it into the Decon Bag

11. Secure airtight Decon Bag while wearing medical gloves and prepare for transport, preferably outside the Passenger Compartment of the apparatus

12. Use soap and water or facial wipes (while still wearing medical gloves) to remove toxins from the most vascular areas of their skin (i.e. face, head, neck, jaw, throat, underarms, groin, and hands).

If possible, wash hands and face with water and a de-greasing soap (i.e. Dawn™ dish soap) prior to leaving the scene.

13. Continue on to screening/hydration/replenishing/relaxation area

 

POST FIRE

14. Make arrangements for Decon Bags to be picked up, delivered, or cleaned on-site

15. Shower to wash off any remaining residue from their skin

16. Clean all other items that may not withstand full water immersion (i.e. helmet liner, inside of helmet, thermal imaging camera, portable radio and strap, flashlight, SCBA mask, etc.) using a damp, soapy cloth.

17. Log all cleanings & repairs in the Gear Wash App or similar database.

18. Encourage routine screenings for early detection

 

OTHER TIPS:

  • Make sure the last person to use the hose cleans it prior to storing
  • Restrict finger foods from the fireground. Only provide meals that require use of utensils to eat, ensuring no one uses their hands
  • When directly handling contaminated equipment/PPE, personnel should wear medical gloves.
  • If laundering contaminated PPE on-site, use an NFPA-approved extraction washer and detergent and follow the PPE manufacturer’s instructions.
  • High traffic areas of the apparatus’ passenger compartment (i.e. seats, doghouse, headsets, etc.) should be wiped down on a weekly basis.
  • As a rule of thumb, if any equipment smells of smoke, it is considered to be “contaminated” and shall be decontaminated as soon as possible.

Categorized: Decon